Location: Home Page > Tesing Center > Brief Introduction of New Energy Testing Center

 

New Energy Testing Center was established in 2009 which aimed at testing and certification for new energy products. This Testing Center covers an area about 3000 square meters and contains four laboratories, High Power Product‘s Lab, Environment Test Lab, EMC Test Lab and Electrical Safety Lab. It has 1MW global power grid environment, advanced testing equipments and test analysis team rich in experience. Besides it is in accordance with the requirements of ISO/IEC 17025.

Date Download

New Energy Testing Center.pdf

Quality policy、Quality object、Laboratory qualification

Quality policy

Scientific & just, accurate & reliable, normative, customer satisfaction

Testing must be done according to the following principle, test method should be scientific, behavior must be just to ensure results are accurate and reliable, good specification and satisfied testing service to clients.

 

Quality object

Do not have any conclusive mistake in the test report.

Accuracy rate is more than 95.5%.

Customer satisfaction is more than 80%.

Testing completion rate is more than 95% every month.

 

Laboratory qualification

From now on New Energy Testing Center has obtained the authorization from UL, VDE, TUV and other certification authorities. These authorities also test and carry out projects in it, such as solar power and electrical quality test items of NESC, CQC certification item of CCIC Southern Electronic Product Testing (Shen Zhen) Co. LTD, Nuclear power plant high-capacity battery energy storage system prototype identification of China General Nuclear Power Group Technology Institute, CGC certification item of Shen Zhen Academy of Metrology & Quality inspection, SAA certification item of Bureau Veritas.

 

UL Laboratory Authorization

The authorized standards are as follow:

UL 1741-2010:Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources

IEEE1547:IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems

IEEE1547-1 IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems

UL2202 Electric Vehicle (EV) Charging System Equipment

UL Subject 2594 EV Cord Sets& Charging Stations

UL2231-1 Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: General Requirements

UL2231-2 Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems

 

TUV Laboratory Authorization

The authorized standards are as follow:

IEC 62109-1:Safety of power conversion equipment for use in photovoltaic power systems—Part 1-general requirements

DIN V VDE V 0126-1-1:2006-02 Automatic disconnection device between a generator and the public low-voltage grid

VDE-AR-N4105:2011-08 Power generation systems connected to the low-voltage distribution network

IEC/EN 61851-1:2011 Electric vehicle conductive charging system —Part 1: General requirements

IEC_69_186_CD_2010 (IEC61851-23) Electric vehicle conductive charging system-part23:d.c. electric vehicle charging station

 

 

 

 

 

VDE Laboratory Authorization

The authorized standards are as follow:

IEC62109-1:Safety of power conversion equipment for use in photovoltaic power systems—Part 1-general requirements

DIN V VDE V 0126-1-1:2006-02 Automatic disconnection device between a generator and the public low-voltage grid